DTF Printing

Print the mark. Choose the garment.

A focused print-only surface for artwork that needs a clean path to apparel. Keep DTF Transfers separate from the Custom Apparel route and choose the experience that fits your project.

Need the garment too? Custom Apparel
01

Share the artwork

Start with a clear file or reference and the placement you have in mind.

02

Set the direction

Choose the print format and details that match the piece you want to make.

03

Use it on the garment

Keep this route distinct from Custom Apparel: the garment is yours to bring or choose separately.

Print workspace

Set up the artwork path.

Upload PNG, JPG/JPEG, GIF, WebP, or PDF artwork, review your sheet and retail total, then continue to hosted checkout. Files up to 20 MiB for images and 50 MiB for PDFs are accepted; HEIC/HEIF is not supported.

Loading print catalog…

Application instructions

How to press your transfer.

DTF transfers you press at home — heat, time, and pressure, no guessing.

Press settings

The two dials that decide the print.
Match heat to fabric, then press firm. The numbers below are the safe range for household heat presses and hobby iron-on presses.
Heat
300–320°F for cotton and blends · 270–290°F for polyester
Pressure
Firm

Artwork requirements

Upload the file you want printed.
Use PNG, JPG/JPEG, GIF, WebP, or PDF. Images can be up to 20 MiB and PDFs up to 50 MiB. HEIC and HEIF are not supported; transparent PNG artwork is best for clean edges.
  1. 1

    Pre-press garment to remove moisture

    10 sec

  2. 2

    Press transfer onto apparel

    10–15 sec

  3. 3

    Wait at least 10 seconds to peel (hot or cold)

  4. 4

    Final press with teflon, parchment, or another shirt

    10 sec

Order a single DTF transferEmbroidery, patches, chenille, sewing, team/bulk, or custom work?