DTF Transfers

Your artwork, ready for the garment you already chose.

This is the print-only route: share the artwork, choose the transfer direction, and use the finished piece on a compatible garment of your own.

Want Ralph to handle the garment? Custom Apparel

Bring the artwork

Transparent PNG, vector artwork, or the clearest reference you have gives Ralph a strong starting point.

Choose the garment

This is the print-only path for a compatible garment you plan to press yourself.

Keep the detail

Full color, gradients, logos, names, and numbers stay ready for the piece you have in mind.

Choose your transfer

Build the print-only brief.

Choose a supported size, upload the artwork, review the one-item cart, and then pay through hosted checkout. Your file stays attached to the paid order.

Loading the transfer builder…

Application instructions

How to press your transfer.

DTF transfers you press at home — heat, time, and pressure, no guessing.

Press settings

The two dials that decide the print.
Match heat to fabric, then press firm. The numbers below are the safe range for household heat presses and hobby iron-on presses.
Heat
300–320°F for cotton and blends · 270–290°F for polyester
Pressure
Firm

Artwork requirements

Upload the file you want printed.
Use PNG, JPG/JPEG, GIF, WebP, or PDF. Images can be up to 20 MiB and PDFs up to 50 MiB. HEIC and HEIF are not supported; transparent PNG artwork is best for clean edges.
  1. 1

    Pre-press garment to remove moisture

    10 sec

  2. 2

    Press transfer onto apparel

    10–15 sec

  3. 3

    Wait at least 10 seconds to peel (hot or cold)

  4. 4

    Final press with teflon, parchment, or another shirt

    10 sec

Need a gang-sheet workspace?Embroidery, patches, chenille, sewing, team/bulk, or custom work?